Connect This Device Using a Usb Cable or Register It Again
I of the most common problems PS4 users become on their console is when the arrangement won't respond to the controller. A user connects the PS4 controller to the console, yet when they turn on the PS4 they receive a large message on the screen saying: "Connect the Dualshock 4 using the USB cablevision and then press the PS button", just as you can see in the paradigm below:
This issue happens due to several reasons that we will illustrate in this article. Nosotros'll also provide you lot with efficient solutions to work around this problem and get your PS4 controller working once more.
Causese of the Consequence
When yous get a message maxim:"Connect the Dualshock iv using the USB cable and then printing the PS button", that means there'south a trouble either with your controller, your USB connection or the PS4 system.
So, permit'due south list below the about common reasons for this issue:
- The PS4 controller is defective/malfunctional or not compatible with the current firmware update you're running.
- Your PS4 is too dirty within that some hardware components on the motherboard are not functioning properly.
- There is a problem with the USB connection between the controller and the PS4. It'due south either the USB cable or the PS4 USB port that is not working.
- Yous're using an older PS4 model that is not fully uniform with the latest firmware update your console is running.
These are the most mutual reasons for this problem, and nosotros'll try below to advise a few solutions that you lot can do to get over that.
In order to fix Error Bulletin "Connect the Dualshock iv using the USB cable and so press the PS button", effort the methods illustrated below:
i. Turn Off the PS4 and Unplug Everything
The very first step yous need to make in guild to fix the "Connect the Dualshock four using the USB cable and then press the PS push" fault is to plough off the PS4 and disconnect everything from it.
So, let's showtime doing that:
- Turn off the PS4 by long pressing the power button until y'all hear the second beep and then the PS4 ability light turns off.
- Once done, unplug everything connected to the PS4. Remove all USB peripherals like an external difficult drive, a controller or a headphone ready.
- Also, unplug the PS4 power cord from the power outlet.
- Now, leave your PS4 similar this for non less than iii minutes then plug the ability cable into the power outlet and connect the controller just, not anything else.
- Turn on your PS4 and encounter if this has worked or not.
If this method hasn't helped you lot, effort the next method.
ii. Clean the Inside of the PS4
When the PS4 is internally muddy, some hardware components will fail to work properly as they should. For that reason you need to always clean the inside of PS4 in gild to maintain the best performance of your panel.
It's actually possible that "Connect the Dualshock 4 using the USB cablevision so printing the PS button" Error is caused by a malfunctioning hardware component that dust and dirt accumulated inside your console hinder information technology from working properly. So, when you clean your PS4, yous make sure all components don't have an issue with dust impacting their operation.
iii. Check your PS4 USB Ports
Make sure the USB port on your PS4 to which you connect your controller is actually working. Check for whatsoever harm, loose, dirt/derbis and look if it seems fine to you or non.
If everything seems good and there's no sign of damage or defect, move to the next method.
4. Check your PS4 Controller USB Cable
Make certain the USB cablevision with which y'all connect your PS4 controller to the console is intact and has no wears. If it is possible, y'all can connect your controller to a PC or another PS4 and bank check whether it gets easily recognized or not.
Also, cheque the connectors in that cablevision for any dirt/derbis and clean them.
5. Utilize the Original PS4 DualShock 4 Controller
If you lot have got the "Connect the Dualshock 4 using the USB cable and so press the PS button" Fault after updating your PS4 organization software, at that place's a big hazard that the PS4 controller you're using has incompatibility issue with the new firmware version.
If this is the case, the only thing you can practise here is to apply the PS4 DualShick 4 controller and check whether information technology works or not.
You can hire that controller from a friend, or take your console to a repair shop and ask them to try a DualShock 4 controller on your console before yous purchase information technology.
6. Format your PS4 Internal HDD
It's possible that you oasis't successfully updated your PS4 system software, thus some core files are corrupted. This can be either considering of a badly downloaded update file or a degrading hard bulldoze.
In all cases yous will demand to first fully format the PS4 internal hard drive in order to remove any potential errors on information technology. Y'all must do that on a PC, and brand sure to do the FULL format non the QUICK one.
once washed, supplant your PS4 hard drive and initialize your PS4 and install the latest system software version. Now check if this has worked for you or not.
7. Expect for the Side by side Update
According to some of our savvy readers who take tried every possible way to prepare that issue, information technology is most probably that the new firmware update is not fully compatible with the PS4 model they employ. It has been reported for example that PS4 model (cuh-1216B) has a problem with firmware update 9.0 and users would get the "Connect the Dualshock 4 using the USB cable so press the PS button" error message after a successful update process to version 9.0.
Unfortunately, you can't do annihilation about that simply to expect for the next update that might fix this problem.
Conclusion
If you are getting the "Connect the Dualshock 4 using the USB cable and then press the PS push button" error message after updating your PS4 organisation software, well-nigh probably information technology is a compatibility issue with that new firmware version, especially if you're using an older model of PS4.
For more information on similar bug that might help you, please read the following articles:
- PS4 Cannot Start Problems Fixed
- Fixing PS4 USB Port Not Working
- Fixing PS Button Not Working
Source: https://www.ps4storage.com/connect-the-dualshock-4-using-the-usb-cable-and-then-press-the-ps-button/
0 Response to "Connect This Device Using a Usb Cable or Register It Again"
Postar um comentário